Revised 12/29/23.  Created on 3/1/17.     email: researcher@brainshieldingstore.com [since 2/22/23]

Also see StopMindControl.com, BrainShielding.com, and the BrainShieldingStore.com Fundraising page.

Brain Shielding Store.com  Best Products  Nootropics  LessEMF  X-ray Shielding  Magnetic Shielding  Sounds and Vibes  Empowerment

BrainShieldingStore.com--Brain Boosters/Nootropics, EMF/EMI Shielding, and Sounds and Vibes Shielding for Improved Brainpower.
    Will EMF Brain Shielding Help You?
Best Individual Economical Cost-Effective Brain Shielding Upgrades, Nootropics, and Empowerment Upgrades Including Brain Boosters/Nootropics, Magic Scarves, Lead Rubber or X-Ray Shielding: Thinking Caps, Shielding Vest, and Shielding Coat, SmartShield, EMF Magnetic Shielding, Calendar Planner, Wool Pillow, Shower Mat, EMI Filter, and Temperature Monitor.
Nootropics: Brain Boosters or Nootropics.
EMF Brain Shielding at LessEMF.com, etc.
Lead Rubber and X-ray Radiation Shielding: Thinking Caps, Shielding Vest, and Shielding Coat.
Magnetic Shielding: Straps, Plate Carriers, Magnetic Shielding Metal, Duct Tape, and Magnets
Sounds and Vibes: Sound Absorbers and/or Shielding and Anti-Vibration or Vibration Reducing Shielding.
Empowerment: Health, and Personal Organization, etc.

BrainShieldingStore.com--EMF Brain Shielding at LessEMF.com, etc.     EMF Brain Shielding at LessEMF.com updated [4/25/23]
    Strong EMF Brain Shielding Fabrics
  This website includes some paid links. (When you click on links to various merchants on this store website and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.)
                                                               

EMF brain shielding is a helpful innovation that some individuals might be able to use to increase their brainpower.

updated [4/25/23]

EMF Brain Shielding at LessEMF.com

LessEMF.com sells excellent quality EMF shielding.


   
CobalTex is an excellent metal cloth EMF magnetic shielding product.  Rated at LessEMF.com at a strong 65-80 dB tested over 30MHz to 1GHz.  CobalTex is expensive, but it is lightweight mobile cloth EMF magnetic brain shielding.  It is the best multipurpose EMF magnetic shielding fabric that I am aware of.  Once it is washed without detergent a few times it is soft and easy to wear.  However, it is probably not a breathable fabric, and it is vulnerable to losing a lot of EMF magnetic shielding power if you wash it using any detergent.

EMF Shielding Research: CobalTex EMF Shielding Ideas
     Here are some of the ways you can use CobalTex fabric for EMF shielding:
1. Wrap 3 line feet per mostly double layer of CobalTex tightly and snugly around your head and neck and cheeks (and shoulders and spine) to provide excellent mobile EMF magnetic shielding (but probably not infrared heat shielding, sound shielding, or low ultrasonic EMF shielding) to your head, neck, and possibly part of your upper back and/or shoulders.  You can hold it snugly and tightly in place over your head using magic scarves.  The more your CobalTex EMF shielding covers, particularly your neck, checks, under your cheeks, your brow above your eyes, and near your eyes, the stronger your CobalTex EMF shielding will probably be.
2. Wash CobalTex first using no detergent to make it a soft, easy-to-wear fabric.
     Caution: Only wash CobalTex in plain water using no detergent.  Any detergent will quickly wash some of the metal out of the fabric and reduce its EMF magnetic shielding strength, so avoid using any detergent.  Brand new CobalTex fabric is initially new and stiff but the first few use no detergent washes in the laundry machine gradually softens new CobalTex fabric and makes it less stiff, more comfortable and much easier to wear.
3. CobalTex is pressure-sensitive EMF magnetic brain shielding, and it needs to be pressed tightly against the skin (and/or presumably pressed against hair next to the skin) to be as fully effective as possible.  You can hold it snugly and tightly in place over your head using magic scarves. 
4. Because CobalTex it is pressure-sensitive EMF magnetic brain shielding, wearing a stretchy magic scarf or a balaclava or wool cap over it should increase its EMF brain shielding power.
5. Wearing any tight-fitting stretchy cap over it should increase its EMF magnetic brain shielding power.
6. An additional magic scarf can be used to keep the CobalTex covering and shielding your cheeks.  Also try to safely shield around your eyes as tightly as possible (using safe cloth fabric only to avoid any risk of eye injury) for increased EMF brain shielding power.
7. An Amazon.com quick release buckle strap can hold CobalTex and/or other EMF shielding in place.
8. You can wrap CobalTex around your neck for additional EMF magnetic shielding power.
9. You can wrap CobalTex around your cheeks and under your cheeks and over the top of your head for additional EMF magnetic shielding power.  You can hold it snugly and tightly in place over the side of your cheeks using a magic scarf.
10. You can wear it as a tunic, a short tunic/mini-cape/shoulder shielding, and/or a long tunic underneath your regular clothing.  An Amazon.com quick release buckle strap and/or hair pins can hold it in place.
Caution: While it is a strong shielding fabric, it might not be a breathable fabric.  It might produce mild skin problems.
Caution: When used as a tunic, it might be prone to slipping out of position, and thus periodically reducing its strong EMF magnetic shielding power.  (If someone zapping you has tuned his zap power to your strongest EMF shielding and your EMF magnetic shielding power keeps slipping, this can be a problem that requires intermittent readjustment of your CobalTex EMF magnetic shielding to restore its full EMF shielding power.)
11. You can also create and privately use an EMF magnetic shielding powerful CobalTex small eye and face mask, medium eye and face mask, and/or large eye and face mask.  A CobalTex small eye and face mask involves using 6-12 inches of CobalTex fabric and cutting eye holes in it, and wearing it all at near eye level and above.  A CobalTex medium/large eye and face mask involves using a 12-18 inches of CobalTex fabric and then carefully cutting eyeholes, a nose hole, and a small/large mouth hole in it.  Then you can tie your CobalTex small/medium/large eye and face mask around your head, shielding your face.  The back end of it can be held in place by tying the 2 ends together (caution, they sometimes slip) or holding it in place with a snug-fitting stretchy magic scarf.
    If you wear glasses, the CobalTex shielding might be designed to attach to the glasses (with 2 small eyeholes) or it might be designed to fit over the glasses (with eyeglass holes enlarged enough to easily slide the glasses in and out of the CobalTex eye and face mask.
Caution: While this 12"-18" CobalTex face mask works well and improves EMF shielding, at least the large 18" face mask probably does not provide a good public appearance, so you'll probably want to use this CobalTex EMF shielding in private only.
12. CobalTex can also be wrapped around your body, as a head wrap, neck wrap, cheek wrap, arm wrap, wrist wrap, hand wrap, leg wrap, and/or foot wrap. However, unless it is tightly secured with a buckle strap, velcro hook and loop strap, and/or tight fitting clothing, it might become loose and intermittently lose some EMF shielding power and/or fall out.
13. CobalTex can be used as extra spot shielding.  If you can identify where the beam weapon zap is most impacting your brain, for example your cheeks, or forehead, or neck, or hands, or wrist, you can add more CobalTex to shield the zapped vulnerable spot(s) to provide more instant EMF magnetic brain shielding power right where you need it now.  Sometimes a little extra CobalTex spot shielding can go a long way towards EMF shielding your brain and improving your brainpower.
Caution: Do not remove EMF shielding including CobalTex that is tightly fitted in place.  You will probably accidentally reduce your EMF shielding power.
Caution: If possible, particularly if you are a secondary target, try to covertly upgrade your personal EMF shielding when no when is actively mind-reading your thoughts. You want to avoid a mind control software operator increasing the mind control zap power against you.
14. You can try placing CobalTex on the seat and/or back of any chair that you use and see if that helps shield you.  However, please be careful to avoid leaving valuable EMF shielding material in an unsecure location where it might be vulnerable to theft.
15. You could also try using it as a thin 42 inch wide EMF shielding blanket and use it when you are awake and/or trying to sleep.



RayPad provides extremely powerful flexible lightweight EMF magnetic foam shielding.  Rated at LessEMF.com at an amazingly strong 100-139 dB.  It is also very expensive.  Compared to RayPad, EMF shielding metal provides stronger EMF magnetic shielding, but EMF shielding metal is much heavier.

EMF Shielding Research: RayPad EMF Shielding Ideas
     While RayPad is amazing powerful, please remember that it is most effective when pressed tightly against the skin.
    RayPad might offer a wide EMF spectrum range of magnetic EMF magnetic shielding, plus possibly some stealth EMF magnetic shielding since the EMF magnetic shielding metal-soaked RayPad foam might weaken/blur/backscatter/diffuse an EMF signal.   The foam in the RayPad might provide some limited low frequency EMF sound wave and/or low ultrasonic frequency EMF magnetic shielding.  The EMF magnetic shielding metals soaked into the RayPad foam might also provide some infrared shielding.



MagnetShield, 4" wide is an excellent metal product for heavy electromagnetic EMF shielding.  It can be held in place by using one or more Amazon.com quick release buckle straps or a plate carrier or attached to other electromagnetic shielding ferrous metal (metal that magnets stick to) with strong neodymium magnets.

Research on Magnetic Shielding Using MagnetShield
Also see my notes on Advanced Stationary Magnetic EMF Brain Shielding for some ideas on how you can use it.

Here are some things you can do to build MagnetShield plates.  Long Magnet Shield plates can easily be bent into MagnetShield circular bands.
1. You can cut it with tin snips into the length (and, if necessary, width) you need.
2. You can fold the short ends over on themselves to eliminate sharp edges on both ends.
3. You can use a thin slice of duct tape to tape over the long edges and maybe the folded over short edges. This helps safety-proof it.
4. You can wrap Velostat around it to protect it from rust to to give it a smoother black, not metal, appearance.
5. You can tape magnets to Magnet Shield so that it becomes a quick-install quick-release MagnetShield circular band or MagnetShield plate that you can attach and detach from other MagnetShield circular bands or plates easily.  Tape the magnets (so they don't slide off) using duct tape to the underside of the Magnet Shield (the side closest to your body) with the north pole facing your body, and the south pole facing away from your body (towards the underside of the magnet) in order to pull magnetic energy away from, not towards, your body.
6. You can optionally get fancy and add Peacemaker 3.2mm sound absorber and/or Techno Floor Acoustic underlayment to it to give it some additional sound absorption (and maybe a very little anti-vibration shielding). You can also test placing one or more magnets between the MagnetShield at a layer of peacemaker 3.2mm to see if the magnet pull magnetic energy from the metal and into the peacemaker 3.2mm sound absorber to absorb some of the magnetic energy.  (Caution: while absorbing the magnetic energy and reducing the decibel strength of the magnetic energy,peacemaker 3.2mm sound absorber might convert some of the magnetic energy of a silent sound spread spectrum carrier wave into a sound and/or vibrational silent sound spread spectrum energy wave, maybe at the 14,500 Hz mentioned in the silent sound spread spectrum patent).
7. You can hold it in place using magnets and/or quick release buckle straps.

Here are some MagnetShield designs for shielding different parts of your body.

1. Shielding your neck.
     1.1. MagnetShield 2" Inner neck band.  You can wrap a 2" wide strip of MagnetShield preferably wrapped in Velostat around your neck attached to itself with magnets taped to the 2" wide strip. (A 4" wide MagnetShield will not fit under your chin and all the way around your neck, but a 2" wide strip will.)  I strongly recommend taping the edges whin a thin layer of duct tape to safety proof it.  If you are zapped, this will shield your neck and part of the upper part of your spinal cord.  I discovered this MagnetShield neck band increases my brain alertness, and you might make the same discovery for yourself.  Tightness of installation around your neck matters and snugness of fit matters.  The tighter you wrap the 2" wide neck band around itself and around your neck, the stronger your EMF shielding is.  You can also hold it tightly in place with with a quick release buckle strap to help prevent it from loosening and loosing some EMF shielding power. 
     1.2. MagnetShield Outer neck band.  You can wrap a second layer of MagnetShield around the first 2" wide layer of MagnetShield around your neck that is also attached to itself by magnets for additional EMF shielding;  This second layer can and should be wider than 2" where the wider width will smoothly fit around your neck in order to shield more of your neck.  I tried adding an optional layer of Peacemaker 3.2mm sound absorber underneath this second layer of a MagnetShield neck shielding neck band.  (A 4" wide MagnetShield will not fit under your chin and all the way around your neck, but a MagnetShield neck band with a variable width of 2"-4" wide strip will.)  I strongly recommend taping the edges whin a thin layer of duct tape to safety proof it.  If you are zapped, this will shield your neck and part of the upper part of your spinal cord.  I discovered this magnet shield increases my brain alertness, and you might make the same discovery for yourself.  Tightness of installation around your neck matters and snugness of fit matters.  The tighter you wrap the 2" wide neck band around itself and around your neck, the stronger your EMF shielding is.    You can also hold it tightly in place with with a quick release buckle strap to help prevent it from loosening and loosing some EMF shielding power.

2. MagnetShield Head band(s).  You can wrap a 4" and/or 2" wide MagnetShield head band around your head.
3. MagnetShield Belly band.  You can wrap a 4" wide MagnetShield belly band around your belly and lower back to shield your belly and back. Add extra length to be sure that it fits.  Overlapping a belly band over itself is OK.
4. MagnetShield Arm band.  You can wrap a 4" wide MagnetShield armband around your upper arms to shield your upper arms.
5. MagnetShield Plates to shield the back and sides of your head.  You can connect them using quick-install quick release magnets to your MagnetShield neck band.  You can also use a more expensive larger plate of MagnetShield to produce quick-install quick-release MagnetShield plates wider than 4 inches to shield the back, top, and/or sides or your head.
6. MagnetShield Cheek Plates to add optional quick-install quick release shielding in front of and around the sides of your cheeks.


 
Tin Snips are necessary to cut metal, including MagnetShield and G-iron SuperFlex.


 
Velostat is very cheap EMF shielding black plastic stealth shielding with some electrical conductivity.  Available by the foot for personal EMF shielding and by the roll for area EMF shielding.  You can wrap Velostat around MagnetShield or other EMF shielding metal to protect MagnetShield or other EMF shielding metal from eventually rusting.  As plastic, it is more flexible than metal and less flexible than fabric.  It eventually creases and wears out.

EMF Shielding Research: Velostat EMF Shielding Ideas
     Velostat is very cheap and easy to add to your inventory of EMF shielding materials to experiment with.  It is also stealthy cheap and very low strength EMF shielding.  It is very pressure sensitive and relies on direct connection to the skin and/or EMF shielding to shield most effectively.  It requires being folded over on itself many times to add up to effective personal EMF shielding strength with a thickness of 4, 8, or 16 layers thick.  One layer alone is far too weak to provide much EMF personal shielding, although one layer will shield MagnetShield from rust.  One layer of Velostat can be used for area shielding.
     Velostat is also known as Linqsat.
     According to Wikipedia, "Velostat, also known as Linqstat, is a packaging material made of a polymeric foil (polyolefins) impregnated with carbon black to make it electrically conductive.  It is used for the protection of items or devices that are susceptible to damage from electrostatic discharge:"  (Peacemaker 3.2, by the way, an excellent cheek shield, is also made from recycled tire rubber, and also contains carbon black.)
     As plastic, it is more flexible than metal and less flexible than fabric.  It eventually creases and wears out.
     You can wrap Velostat around MagnetShield or other EMF shielding metal to protect MagnetShield or other EMF shielding metal from eventually rusting.
     You can trying using Velostat folded over on itself many times as a cheek plate to shield your cheeks, held in place by a magic scarf or quick release buckle strap.  It is very dependent on being pressed tightly against the skin for its EMF shielding effectiveness and would depend on a magic scarf or quick release buckle strap to hold it in place..
     It feels cool to the touch and could be used to try to avoid/minimize overheating.
     I have experimented with wrapping a number of layers of approx. 4"-6" wide Velostat over the spine to shield the spinal cord, wrapping the top of it around a MagnetShield neck band and wrapping the bottom of it underneath a MagnetShield belly band.
    You could try using Velostat as a temporary tunic for an extra layer of EMF shielding.  However, because it crinkles and does not look good, I would skip wearing it as a tunic or under tunic in public..
    Michael Menkin has advocated trying a Thought Screen Helmet or an anti-mind-reading Velostat thought screen made out of multiple layers of [stealth shielding] Velostat as a shield against mind-reading (although he oddly and falsely claims that aliens, not CIA/.NSA/Schriever Air Force base/deep state government contractors) are using the mind reading [aka RNM or remote neural monitoring] technology.  Michael Menkin also warns of a "telepathy war".  (At this point, I am not an expert on blocking mind reading technology or remote neural monitoring, which I suspect is based on the 1974 and other 1970s Robert G. Malech patents, and any attempt to block mind reading could probably be countered by mind control workers simply increasing the decibel strength of a zap until mind reading blocked by low strength EMF shielding has been re-established.)
    My guess is that a thick layer of Velostat could add a few decibels of stealthy EMF shielding to EMF shielding for the head.
    It can be used to partially cover over the inside of a window to provide some additional privacy.  It could also theoretically temporarily be used as an EMF shielding curtain, although it does not have the strength or flexibility of fabric.
    Velostat has been used for area EMF shielding, and a roll of 4 mil Velostat or a roll of 6 mil Velostat can be used.  It provides some limited stealthy EMF shielding, and it is light enough that it can probably be duct taped to walls (where it could very lightly EMF shield against cell phone tower beams and/or other beams) and/or ceilings (where it could very lightly shield against NRO or National Reconnaissance Office spy satellite beams).  (If you do duct tape it to walls and/or ceilings, be very careful not to damage any paint, and any duct taping that you might do is your hypothetical legal liability, not mine.)



   
G-iron SuperFlex is an excellent medium/large metal EMF shield product.

Research on Magnetic Shielding Using G-iron SuperFlex
     You can shield the back and sides of your head in the privacy of your own room by using 1 line foot of G-iron SuperFlex wrapped around the back of your head in a U-shape and held in place by 2 or more Amazon.com quick release buckle straps to hold it in place and/or attached by strong neodymium magnets taped to it to a MagnetShield neck band and/or MagnetShield plates attached to a MagnetShield neck band..  (It provides excellent  EMF brain shielding, but it has appearance limitations, weight limitations, and cost limitations.  Long term heavy use of more than 1 line foot of G-iron SuperFlex EMF shielding your head can cause weight and/or skin abrasion issues.)
     You can also add G-iron SuperFlex EMF Shielding cut to the proper size using Tin Snips into the inside of front and back plate carrier pockets of a discrete/covert plate carrier and/or a regular plate carrier.  You could also cut a piece of G-iron SuperFlex to fit into side pockets for plate carriers.


New Amazon.com quick release buckle straps.  These straps can also be purchased from a preselected list of quick release buckle straps that includes EMF shielding theory notes explaining my theories about to use these quick release buckle straps optimally. 

Very Brief EMF Shielding Research Summary: Maximizing Pressure-Sensitive EMF Shielding Using Quick Release Buckle Straps.
     These quick release buckle straps can hold pressure-sensitive EMF brain shielding fabric in place by pressing some of the fabric tightly against the skin and helping to maintain the EMF shielding effectiveness of the fabric.  (If your EMF shielding fabric loosens up and is temporarily no longer pressed tightly against the skin, it temporarily loses some or much of its EMF shielding effectiveness until it is again pressed tightly against the skin.)  For a more detailed explanation. see my detailed Quick Release Buckle Straps EMF Shielding Notes.

[4/25/23]

AL60 Wall Shield. According to LessEMF.com, it is a "Great material for RF, EMI shielding at room temperatures. over walls, cables, electric panels and more. Polyester coated, very light weight, tough and flexible, yet easy to cut with scissors. Conductive on one side. Apply to walls, ceilings and other surfaces to achieve ~ 60dB at cell phone frequencies and at least 40dB from 100 MHz to 18 GHz. Use ordinary spray adhesive on wall, then apply AL60, press into place. Leave conductive side exposed for easy grounding. Apply 2 inch wide aluminum tape over the seams. In addition, this material makes very effective shielded pouches, wallets and sleeves. Non-conductive side will hold latex paint fairly well. Will tolerate temps from 32 F to 122 F. Metal is 18 microns. The material is 39″ (1meter) wide.."  Polyester coating makes this product more durable and easier to use than aluminum foil.

[4/25/23]

Microwave/MW Absorber Fabric.  According to LessEMF.com, "Carbon is conductive in some forms, and a very good microwave absorber. Using non-woven nearly-pure carbon fibers, to achieve both good microwave shielding and high RF absorption, this unique material has the following specifications:
Carbon base material (without plastic laminate):
Width: 48 inch (1219 mm)
Weight: 34 g/m²
Thickness: 18 mil (0.445 mm)
Resistivity: ~3 Ohms per square
Tensile: 47 N/15mm
MW Absorbing Sheet Performance. We are pleased to offer this improved version of our very low cost microwave absorber sheet. This version is plastic (polypropylene) laminated on both sides. This gives better durability and easier handling. Dust is reduced and skin contact is not a problem.
Application Notes:
1- Double or triple the layers of MW Absorbing Sheet to increase effectiveness.
2- To create a super high RF performance enclosure, you can combine a layer of this Microwave Absorber material with a layer of a high performance fabric shield such as Pure Copper Polyester or Nickel Copper Ripstop to provide the highest RF shielding. Line the inside of the shield with Absorber… it will scavenge any RF which might leak in.
3- Grounding is not necessary with this material.
4- Minimize repeated bending/flexing of this material
Super light weight. Can be used to line walls and containers, make drapes or partitions. Does not permit air circulation, minimal light penetration.
48 inch wide, but surface is non-conductive due to laminate. Request roll shipping if you need to avoid creases from folding."



ArgenMesh. A silver mesh fabric.
Caution: Silver in EMF shielding fabrics is vulnerable to being damaged by water and washing it in the washing machine. Wash it without using detergent to avoid the risk of the detergent washing out the silver content of the fabric.


 f
Silver Lining T-Shirt.   Caution: Hand washing in a bowl without running water or detergent and hand drying this fragile fabric undershirt takes some extra time and care.  Careful extra hand washing and drying time is the labor cost of properly maintaining and caring for this fragile very light weight EMF shielding T-Shirt.
    
EMF Shielding Research: A Very Light Silver Mesh T-Shirt vs. a Very Heavy CobalTex Home Made Under Tunic.
     In comparison to the Silver Lining T-Shirt, a handmade CobalTex tunic (that takes some time, money, and effort to build) probably leaves some unshielded parts of your belly and lower back that a (premanufactured and ready to wear) Silver Lining T-Shirt will usually shield.  While a handmade CobalTex tunic is noticeably stronger than a Silver Lining T-Shirt, the CobalTex tunic is much more susceptible to accidentally sliding out of position, and accidentally reducing your EMF shielding strength.  Also, a Silver Lining T-Shirt is a breathable lightweight silver-plated stretchable nylon mesh shirt.  CobalTex is probably not a breathable fabric and might produce mild skin problems.  Also, a Silver Lining T-Shirt is fragile and should be hand washed without running water and without detergent and is very vulnerable to the metal washing out of it.  CobalTex is much less fragile and it is much easier to wash and dry and it can be washed without detergent in a washing machine preferably using a delicate or permanent press washing setting.
Lightest, most fragile EMF-shielding T-shirt: a Silver Lining T-Shirt.  Easy to wear in summer, but it is vulnerable to summer sweat, it requires hand washing with running water or detergent, it requires hand drying, and the silver eventually washes out, leaving a very low EMF shielding strength nylon mesh T-shirt.
Heaviest, strongest magnetic shielding T-shirt: a hand made CobalTex tunic, secured in place with quick release buckle straps.



Stetzer Filter.  From LessEMF.com.  Dirty household electricity EMI filter.

EMF Shielding Research: Filtering out EMI in Your Household Electricity
     The covert op mind control workers beaming me strongly complained at least twice about Stetzerizer dirty electricity EMI filtering and EMI reduction technology.  I assume that if they don't like it, then it is probably very helpful to mind control technology victims, but not mind control technology workers, who might object to losing some decibel power in their mind reading and/or mind control software.
      Radio waves and probably microwaves prefer metal antennas and they will travel along electrical wiring. This filter reduces the ability of your household or office electrical supply wiring system to act like a giant antenna for beamed in EMF radio frequency and/or microwave frequency beams by filtering out and reducing some of the high frequency EMI or electromagnetic interference.
      This EMI filter, designed to filter out dirty electricity, also might dampen or reduce the input and/or the output decibel strength of mind control technology, if any, in your EMI in your house wiring near where each EMI filter is installed.  It could take up to 4 or more filters to cover a room or 20 or more EMF filters to cover an entire house.  You can start by adding one or more Stetzerizer filters and see if it makes any difference.

     Please be aware that providing EMI filtering for electrical household wiring, a smart move to the extent that you need it and can afford it, filters and shields just one of many ways covert mind control technology energy weapons can or theoretically could zap, impact, and manipulate human targets.
     EMF energy waves used by covert mind control technology can spread in a variety of ways. Trying to filter out EMI from household electricity that might include mind control technology EMI energy waves is just one way to try to shield against covert mind reading and mind control manipulation.  Other ways, including shielding yourself, other people, chairs, beds, walls, floors, and any electromagnetically zapped hot items can also include:
    1. EMF shielding against incoming energy hi-frequency mind control technology carrier wave beams, usually probably from a spy satellite or a weaponized cell phone tower, but possibly also from other sources.  (These other sources could theoretically include, for example, an imsi-catcher or stingray or a short range AM or FM transmitter, or even a nearby loudspeaker utilizing silent sound spread spectrum technology.)
    2. EMF shielding against silent sound spread spectrum technology, by using sound shielding to shield against 14,500 Hz silent sound waves, electromagnetic shielding to shield against heterodyned silent sound carrier waves, sometimes at 455 KHz. and using anti-vibration shielding on the floor, on seats, and possibly bedding and/or furniture.
    3. EMF shielding against brain disabling EDOM, or electronic dissolution of memory, and RHIC-EDOM technology, possibly including blocking/reducing it at the walls and/or ceiling with aluminum and/or other shielding, and possibly trying to block it with aluminum foil and/or EMF shielding metal at the point of it impacting and partially disabling your brain.
    4. Trying to avoid or cope with silent sound and/or other technology beaming in to the intermediate frequency of most AM radio (455 KHz), narrowband FM radio, and/or TV, and utilizing radio, TV, and/or stereo speakers to beam silent sound spread spectrum technology at targets.
    5. Using electronic communication technology cell phone transmitters and/or satellite transponders to beam into a specific cell phone transmitter and/or satellite transponder.  I don't know if Wi-Fi, Wi-Fi 6, and/or Bluetooth are also vulnerable to being zapped, and how easy or hard it is to get data signatures from a human target and start tracking the human target independently of his location and/or data communication cell phone transmitters and/or satellite transponders.

     If you are being zapped by hi-tech covert beam weapon mind control and/or mind reading and/or remote sensing technology, this filter might help accomplish 1-3 of these goals:
1. Possible partial limited shielding against remote sensing wireless EMF brainwave theft (including theft of your private thoughts).  This filter might reduce the ability of a remote sensing beam weapon system to use your house wiring as an electrical antenna or EMF collection plate in its attempt to gather electrical data from a remote sensing DEW (or directed energy weapon) beam that a remote sensing DEW EMF beam weapon (or satellite remote sensing DEW EMF beam weapon or cell phone tower weaponized DEW EMF remote sensing beam) might first beam into your targeted brain (to swipe brain wave data) with a resulting electromagnetic field after being modified by the target's brain waves then flowing into electrical wiring and/or a special antenna system that is used to electronically retrieve the swiped brainwave data.  Household electrical wiring easily conducts and transmits electrical waves or EMF at a wide variety of frequencies, not just the American standard of 120 volts at 60 hertz.  (This might theoretically make very rare low decibel low strength electronic mind reading and/or remote sensing slightly more difficult or maybe even sometimes temporarily impossible at low decibel EMF beam strength but not at high decibel EMF beam strength.  If you are an important target, mind control software operators might increase the strength of their DEW EMF beam trying to find you and retrieve your brainwave data, but if you are a lower value or secondary target they might not notice that you avoided or somehow electromagnetically shielded yourself against their swiping your brain waves.)
2. I'm speculating that it might or might not also decrease beam weapon decibel attack strength if the house wiring system is in any way used in the beam weapon attack against the targeted individual and/or electronics like an AC or alternating current DC power supply connecting an electronic device to household AC wiring power supply, a computer's power supply, a computer, an android computer's power supply, and/or an android computer.  [I have not tested this yet.]
3. This is probably one way to probably slightly reduce a room's or building's electronic target profile.
     This EMF shielding is distinctly different than EMF shielding shielding a person and EMF shielding a chair or a room or a building against airborne EMF waves, airborne silent sound waves, and vibes vibrating though the floor and furniture, because electricity transmitted by household or office electrical power supply wires can bypass room or building EMF shielding defenses.

     You can try this product one filter at a time, and you'll probably eventually want more than one.  (However,before you buy this product in quantity, you will probably first want to spread out your EMF shielding money to first shield your body and then try multiple EMF shielding options.)
     Caution: This filter partially shields and reduces some high EMI frequencies in the household electrical wiring.  It does not shield computer internet network cable and it does not shield cable TV coaxial cable.
     Caution: You probably will not notice any immediate results from adding just one filter or even more than one filter.  The specialized shielding effects of these filters are cumulative, depending on how many filters you are using.
     Caution: Using this and other EMF shielding for electrical wiring (including network cables and cable TV coaxial cables) could backfire if this forces a beam weapon operator to increase remote sensing beam weapon strength in his attempt to generate a usable wireless EMF return signal including either a target signature, target signatures, and/or a usable EMF data signal (with, for example, brainwaves that reveal one's electronically wirelessly swiped private thoughts) and you have accidentally heavily shielded against EMF signature detection and EMF mind reading tech by heavily shielding your electrical wiring without also heavily shielding your brain and body from mind control attack from EMF beam weapon technology at the same time.  (At low decibel low DEW EMF beam weapon zap strength, you might be at least temporarily electronically undetectable by and invisible to, not detectable with any known EMF signature by, and not mind readable by a mind control tech DEW beam weapon software operator, but at higher decibel higher strength DEW EMF beam weapon zap strength you might be detectable, noticeable, mind-read, and zapped way too hard by mind control technology.)  Another locating a target tactic that I suspect some mind control software operators use is to first beam at very high decibel strength to establish a wireless electronic mind-reading and/or tracking connection, and then try reducing the beam weapon strength once a connection is established to under the maximum decibel level that the mind control software operators want to use.
     Caution: Becoming partially or even completely undetectable by and electronically invisible to a beam weapon operator is not the same as the targeted parts of your body being heavily EMF shielded.  If you are already zapped you will probably still be transpondered and zapped from a beam already zapping you and/or your room/house/office while the beam weapon operators are having a hard time detecting target signatures and/or usable electronic beam data from a DEW EMF remote sensing beam that 1) zaps your brain (and/or central nervous system and/or nerves), 2) might or might not piggyback a free ride on house wiring, computer internet cable, and/or coaxial cable, and/or a metal object used as a EMF signal collection plate, and 3) gets detected and provides usable electronic data (probably including an electronic targeting signature) to some electronic listening post (that might or not be nicknamed "south pole" and might or might not look like an indoor/outdoor satellite TV radar antenna transmitting/receiving dish pointed at your room or house, not the sky.  (For satellite TV radar antenna dish aiming comparison, some but not all communication satellites are in geosynchronous stationary orbit 22,236 miles above the equator.  Much more precise proper satellite TV radar antenna dish aiming info is on the Internet.)

Strong EMF Brain Shielding Fabrics

     
CobalTex is an excellent metal cloth EMF magnetic shielding product.  Rated at a strong 65-80 dB tested over 30MHz to 1GHz.  CobalTex is expensive, but it is lightweight mobile EMF magnetic brain shielding.  It is the best multipurpose EMF magnetic shielding fabric that I am aware of.  Once it is washed without detergent a few times it is soft and easy to wear.  However, it is probably not a breathable fabric, and it is vulnerable to losing a lot of EMF magnetic shielding power if you wash it using any detergent.

EMF Shielding Research: CobalTex EMF Shielding Ideas
     Here are some of the ways you can use CobalTex fabric for EMF shielding:
1. Wrap 3 line feet per mostly double layer of CobalTex tightly and snugly around your head and neck and cheeks (and shoulders and spine) to provide excellent mobile EMF magnetic shielding (but probably not infrared heat shielding, sound shielding, or low ultrasonic EMF shielding) to your head, neck, and possibly part of your upper back and/or shoulders.  You can hold it snugly and tightly in place over your head using magic scarves.  The more your CobalTex EMF shielding covers, particularly your neck, checks, under your cheeks, your brow above your eyes, and near your eyes, the stronger your CobalTex EMF shielding will probably be.
2. Wash CobalTex first using no detergent to make it a soft, easy-to-wear fabric.
     Caution: Only wash CobalTex in plain water using no detergent.  Any detergent will quickly wash some of the metal out of the fabric and reduce its EMF magnetic shielding strength, so avoid using any detergent.  Brand new CobalTex fabric is initially new and stiff but the first few use no detergent washes in the laundry machine gradually softens new CobalTex fabric and makes it less stiff, more comfortable and much easier to wear.
3. CobalTex is pressure-sensitive EMF magnetic brain shielding, and it needs to be pressed tightly against the skin (and/or presumably pressed against hair next to the skin) to be as fully effective as possible.  You can hold it snugly and tightly in place over your head using magic scarves. 
4. Because CobalTex it is pressure-sensitive EMF magnetic brain shielding, wearing a stretchy magic scarf or a balaclava or wool cap over it should increase its EMF brain shielding power.
5. Wearing any tight-fitting stretchy cap over it should increase its EMF magnetic brain shielding power.
6. An additional magic scarf can be used to keep the CobalTex covering and shielding your cheeks.  Also try to safely shield around your eyes as tightly as possible (using safe cloth fabric only to avoid any risk of eye injury) for increased EMF brain shielding power.
7. An Amazon.com quick release buckle strap can hold CobalTex and/or other EMF shielding in place.
8. You can wrap CobalTex around your neck for additional EMF magnetic shielding power.
9. You can wrap CobalTex around your cheeks and under your cheeks and over the top of your head for additional EMF magnetic shielding power.  You can hold it snugly and tightly in place over the side of your cheeks using a magic scarf.
10. You can wear it as a tunic, a short tunic/mini-cape/shoulder shielding, and/or a long tunic underneath your regular clothing.  An Amazon.com quick release buckle strap and/or hair pins can hold it in place.
Caution: While it is a strong shielding fabric, it might not be a breathable fabric.  It might produce mild skin problems.
Caution: When used as a tunic, it might be prone to slipping out of position, and thus periodically reducing its strong EMF magnetic shielding power.  (If someone zapping you has tuned his zap power to your strongest EMF shielding and your EMF magnetic shielding power keeps slipping, this can be a problem that requires intermittent readjustment of your CobalTex EMF magnetic shielding to restore its full EMF shielding power.)
11. You can also create and privately use an EMF magnetic shielding powerful CobalTex small eye and face mask, medium eye and face mask, and/or large eye and face mask.  A CobalTex small eye and face mask involves using 6-12 inches of CobalTex fabric and cutting eye holes in it, and wearing it all at near eye level and above.  A CobalTex medium/large eye and face mask involves using a 12-18 inches of CobalTex fabric and then carefully cutting eyeholes, a nose hole, and a small/large mouth hole in it.  Then you can tie your CobalTex small/medium/large eye and face mask around your head, shielding your face.  The back end of it can be held in place by tying the 2 ends together (caution, they sometimes slip) or holding it in place with a snug-fitting stretchy magic scarf.
    If you wear glasses, the CobalTex shielding might be designed to attach to the glasses (with 2 small eyeholes) or it might be designed to fit over the glasses (with eyeglass holes enlarged enough to easily slide the glasses in and out of the CobalTex eye and face mask.
Caution: While this 12"-18" CobalTex face mask works well and improves EMF shielding, at least the large 18" face mask probably does not provide a good public appearance, so you'll probably want to use this CobalTex EMF shielding in private only.
12. CobalTex can also be wrapped around your body, as a head wrap, neck wrap, cheek wrap, arm wrap, wrist wrap, hand wrap, leg wrap, and/or foot wrap. However, unless it is tightly secured with a buckle strap, velcro hook and loop strap, and/or tight fitting clothing, it might become loose and intermittently lose some EMF shielding power and/or fall out.
13. CobalTex can be used as extra spot shielding.  If you can identify where the beam weapon zap is most impacting your brain, for example your cheeks, or forehead, or neck, or hands, or wrist, you can add more CobalTex to shield the zapped vulnerable spot(s) to provide more instant EMF magnetic brain shielding power right where you need it now.  Sometimes a little extra CobalTex spot shielding can go a long way towards EMF shielding your brain and improving your brainpower.
Caution: Do not remove EMF shielding including CobalTex that is tightly fitted in place.  You will probably accidentally reduce your EMF shielding power.
Caution: If possible, particularly if you are a secondary target, try to covertly upgrade your personal EMF shielding when no when is actively mind-reading your thoughts. You want to avoid a mind control software operator increasing the mind control zap power against you.
14. You can try placing CobalTex on the seat and/or back of any chair that you use and see if that helps shield you.  However, please be careful to avoid leaving valuable EMF shielding material in an unsecure location where it might be vulnerable to theft.
15. You could also try using it as a thin 42 inch wide EMF shielding blanket and use it when you are awake and/or trying to sleep.


  80-100 dB.   For sale at Amazon.com.  (Also for sale at eBay.)
TitanRF Faraday Fabric from Amazon.com.  Rated at an amazingly strong 80-100 dB.  TitanRF Faraday Fabric, EMI & RFID Shielding/Cell, Wi-Fi & Bluetooth Blocking/Military Grade Shielding Fabric (44" W x 36" L / 11sq ft. / 1.22 sq. yrds) + Free 12" L Conductive Adhesive Tape.  Tested and certified to MIL STD 188-125 specifications.
Available in 2 sizes:
     1. Standard, 44" W x 36" L 1.22 sq. yes, or
     2. The Pro Construction TitanRF Faraday Fabric Kit, 44" wide x 18' long / 66 sq. ft. / 7.33 sq. yrds.

     You can buy and try 1 package of TitanRF Faraday Fabric for a very low price.  Just please be aware that TitanRF Faraday Fabric's metallic silvery appearance does not look as nice as CobalTex's natural grey appearance.
     FYI, this seller has years of experience using CobalTex, and prefers it to the less expensive TitanRF Faraday fabric.
     FYI, mixing TitanRF Faraday Fabric and CobalTex and/or other EMF shielding fabrics is probably a good idea and it might or might not make some beam weapon targeting more difficult, if the beam weapon target's target signature keeps changing.



Copyright © 2023 by Ed Harding.